Panasonic Ag-a96 Multi-Event Edit Controller

Panasonic
Panasonic Ag-a850
Multi-Event Edit Controller

Price: $2,199.95

Buy now

Item Includes
Power Cable


Description
AG-A850 can be used with a variety of systems from ENG editing to program production. Equipped with 5 RS-422 (9-pin) VTR remote terminals The AG-A850 can control 5 VTRs (3 recorders and 2 source players), allowing simultaneous production of 3 videotapes. Alternatively, the AG-A850 can perform A/B roll editing, selecting 4 source players and editing to 1 recorder. It stores up to 512 events, permitting continuous automatic editing of a program with many cuts and transitions. Edited data can be held in memory for up to 3 days or can be downloaded to a computer. 2 sets of jog and shuttle dials assure quick, accurate and simultaneous control of both source and recorder.

The AG-850 is equipped with 5 RS-422 (9-pin) remote terminals for connection with VTRs. When you connect 4 players and 1 recorder, the AG-A850 allows control of 2 players as source machines. Any of the connected VTRs can serve as the recording source, with selection made at the control panel. When 2 players and 3 recorders are connected, all 3 recorders can be controlled, allowing simultaneous production of 3 tapes.
Features
10-key pad adds convenience for entering edit points
2 GPI ports (RCA jacks)
Monitor display output
4-channel audio editing
+/-0 frame-accurate editing (time code only)
Time code capability
Audio split editing
Auto tag for match frame editing

Specifications
Power Source AC 220 - 240V, 50/60Hz
Power Consumption AG-850E: 10W
Operating Temp. 5 to 40 C (41 F to 104 F)
Operating Humidity 35 to 80%
Dimensions 424 x 107 x 279 mm (16 11/16" x 4 3/16" x 11")
Weight 3.2 kg (7.1 lbs.)
Memory Capacity 512 events (3 days back-up)
VCR Control Recorder: PLAY, STILL, REW, FF, STOP, EJECT, STB OFF, REC, DIAL (JOG, SHTL)
Player: PLAY, STILL, REW, FF, STOP, EJECT, STB OFF, DIAL (JOG, SHTL/VAR)
Editing Control AUTO EDIT/END, PREVIEW, REVIEW, GO TO, GO TO OUT, ALL STOP
VTR/AUX Selection P1, P2, P3, P4, R, AUX1, AUX2, AUX3, AUX4
Editing Mode ASMBL (Assemble), INS V/A1/A2/A3/A4/TC (Insert), CUT, A/B ROLL, Audio Split, Color Frame, Slow-Motion editing
Editing Accuracy 0 frame (TC editing, except Slow-Motion editing and Color Frame editing)
Effect Type WIPE, DISS
Edit Point Input MARK IN; MARK OUT, ENTRY IN/OUT/DUR, LAST X, TRACK, C
EDL Input EVENT, TRANS, PATTERN, FROM, TO, FS, BS, LAST ED, TOTAL, CORCT
Managing List Event Insert, Delete, Move, Copy, Renumber
Setting SETUP, CONFIG, T SET, SYNC GRADE, TC/CTL, CTL RESET
Other Function DUMP, LOAD
Edit Reference Signal CTL (Control Signal), TC (SMPTE/EBU Time Code), VITC
Preroll Time 0, 3, 5, 7,10,15 sec., AUTO
Postroll Time 0.5, 1, 2, 3, 5, 7, 10 sec.
DISPLAY Counter Display
Event Display Event/Trans/Pattern No. Indication
Displays for Recorder/Player Displays for Recorder/PlayNTSC: Max. 23-hour 59-min. 59-sec. 29-frame
PAL: Max. 23-hour 59-min. 59-sec. 24-frame
Monitor Display SET UP, CONFIG, INFO, LIST (EDL), TV monitor
VTR I/F (RS-422) 9-pin x 6 (Spare x 1)
SW I/F (RS-422) 9-pin x 1
EDL I/F (RS-232C) 9-pin x 2 (Spare x 1)
GPI Pin-jack x 2
TTL output level: Low 0 - 0.5V (10mA); High: 3.0 - 5V (-1 mA)
REF Video In BNC x 1, 75 ohms On/Off, Composite Video Signal 1.0Vp-p 0.2Vp-p. 75 ohms
Monitor In BNCx1 , Composite Video Signal 1.0Vp-p 0.2Vp-p, 75 ohms
Monitor Out BNC x 1, Composite Video Signal 1.0Vp-p 0.2Vp-p, 75 ohms
Max. Connectable VCR Number 5 VCRs (as recorder; max. 3 VCRs)
Connectable VCR VCR, equipped with 9-pin remote-connector, such as D-3, D-5, DVCPRO, Disc, Mll, S-VHS
Connectable Switcher Switcher/DVE, equipped with 9-pin remote-connector, such as WJ-MX50, GVG-100/110
Standard Accessory Power Cable